Flash Trigger Wireless YN-622C-TX Kit E-TTL

1.700.000 đ
  • Nhà sản xuất: Yongnou
  • Mã sản phẩm: YN-622C-TX Kit E-TTL
  • Tình trạng: Còn hàng

Mô tả

Đặc điểm nổi bật sản phẩm : 

- Sản phẩm thương hiệu : Yongnuo
- Xuất xứ : Trung Quốc
- Model : YN-622C
- Màu sắc : Đen 
- Tốc độ ăn đèn : 1/8000S
- Phát sóng xa 100m
- Pin : 4 pin AA
- Dùng cho : Canon

Bộ sản phẩm bao gồm : 

1 x YN622N-TX Controller

1 x YN622N Transceiver

2 x calbe

1 x catalogue

Thông tin sản phẩm :

- Sản phẩm mới 100% Fullbox

-  Bảo hành : 06 tháng

Features:
It transmits all the settings in External Flash Menu of your camera to remote flash(es), you can control flash(es) through camera menu.
It supports TTL function.
LCD screen display, multi-buttons quick operation.
The firmware can be upgraded through the USB interface.
Support wireless shutter release function.
The focal length(zoom)of the A/B/C three groups of flash can be adjusted separately.
Equipped with the AF focus assist light (can be disabled).
Grouping flash mode: E-TTL/Manual flash/Super sync.
Supporting mixed use of the A/B/C three groups of flashes with E-TTL, Manual flash, or Super sync flash mode.
The exposure compensation or flash output of A/B/C three groups of flashes can be adjusted separately.
Shutter Sync: first curtain sync, second curtain sync and FP high-speed sync, the highest sync speed is 1/8000s.
Support exposure compensation, flash value lock function(FVL).
Support simulate (modeling) flash, red-eye reduction flash.
Support the flash zooming (auto).
Super Sync (SS) time delay adjustment, for higher x-sync speed than the camera allows.
Settings saved automatically.
The flash sync signal can be input through the PC port.
Support the basic flash trigger (max sync speed is 1/250s) of standard hot shoe (non for Nikon body).
Compatible Camera list:
A: For EOS DSLR camera with external flash control menu:
 for Canon 5D Mark II, 5D Mark III, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D 60D 50D 40D 450D 500D 550D 600D 650D 1000D 1100D.
B: For EOS DSLR Camera without external flash control manual:
 for Canon 5D 10D 20D 30D 300D 350D 1D 1D Mark II.
Compatible Flash:
Compatible ETTL Flash: ( It suport wireless remote control through camera menu ).
for Canon 600EX ( RT ), 580EX II, 430EX II, 320EX, 270EX II
Yongnuo YN-565EX C, YN-468 II C, YN-467 II C, YN-465 C (Yongnuo flash units don't support HSS Function). 
Note: 430EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters.
The compatible shutter cable list:
C1-60D / 70D / 400D Series / 500D series / 600D Series / 1000D Series
C3-40D / 50D / 7D / 1D Series / 5D series 
Specifications:
System type: Digital FSK 2.4GHz wireless controller
Distance: 100m
Channel: 7
Flash mode: E-TTL, manual flash
Sync mode: front-curtain sync, rear-curtain sync, hi-speed sync(auto FP)
Groups: 3 groups(A/B/C)
Sync speed: 1/8000s
Input: Hotshoe
Output: Hotshoe, PC port
Shutter release interface: 2.5mm shutter release interface
USB firmware upgraded: Support
AF assist beam emitter: Support
Applicable battery: 2 * AA battery(Support 1.2V rechargeable battery)(Batteries not included)
Standby time: 120 hours
Package size: 10.7 * 10.7 * 5cm / 4.2 * 4.2 * 2.0in
Package weight: 176g / 6.2oz
Package Lists:
1 * Wireless Flash Controller
1 * C1 Shutter Cable 
1 * C3 Shutter Cable
1 * User Manual?English & Chinese)
1.D886
YN-622C E-TTL wireless flash trigger is a high performance master and slave equipment of multiple flashes photography, through digital FSK 2.4GHz radio wireless transmission, and different photographic effects can be realized through setting your flash at 360 degrees. Its distance of remote control reaches 100M, supporting 7 wireless channels and A/B/C three groups.
General description:
YN-622C E-TTL wireless flash trigger is a high performance master and slave equipment of multiple flashes photography, through digital FSK 2.4GHz radio wireless transmission, and different photographic effects can be realized through setting your flash at 360 degrees. Its distance of remote control reaches 100M, supporting 7 wireless channels and A/B/C three groups.
Remotely change the modes and parameters of the flash quickly when using  for Canon EOS series DSLR cameras which supports external flash function, such as TTL ratio or manually set each group of flash output. Support high-speed sync, the max sync speed is 1/8000s. Support E-TTL, Manual and Multi flash modes. Support E-TTL flash installing on the top of transmitter.
YN-622C 2 transceivers kit consist two similar transceivers, support one camera controlling multiple flashes at the same time. Install the flashes with the receiver additionally purchased to make them into an application form of multiple-flashes, number of the receivers is not limited.
Features:
Compatible flash mode: E-TTL (II)/ Manual/ Multi.
Compatible Shutter sync: 1st curtain, 2nd curtain, high speed sync (HSS/FP), max 1/8000s sync speed.
Control remote flash using camera's flash control menu screen(Remote Control Mode).
Support E-TTL / Manual/ Multi flash mode mix using(Mix Control Mode).
Flash on hot-shoe of transmitter supports ETTL.
Support Flash Exposure Compensation(FEC).
Support Flash Exposure Bracketing.(FEB)
Support Flash Exposure Lock.(FEL)
Support modeling Flash.
Support E-TTL group ratio (ALL/ A:B/ A:B C).
Support Manual/Multi group (ALL/ A:B/ A:B:C).
Support flash zooming (auto, manual).
Support AF assist beam emitter(AF Lamp).
Support PC port triggering strobe flashes and support 1st, 2nd curtain/HSS(Super Sync).
Support LCD Live view triggering.
Support high-speed continuous shooting trigger.
Settings saved automatically.
Compatible  with ALL YongNuo/ for Canon EXII series flashes.
Support single-contact of camera & flash triggering.(max sync speed is 1/250s)
Compatible with:
For Canon 5D Mark II, 5D Mark III, 1Ds Mark III, 1D Mark IV, 1D Mark III, 7D, 60D, 50D, 40D, 450D, 500D, 550D, 600D, 650D, 1000D, 1100D. (For EOS DSLR camera with external flash control menu)
For Canon 5D, 10D, 20D, 30D, 300D, 350D, 400D, 1D, 1D Mark II. (For EOS DSLR Camera without external flash control menu)
For Canon 600EX(RT), 580EXII, 430EXII, 320EXII, 270EX(II) and for YongnuoYN-568EX, YN565C, YN-468C(II), YN-467C(II), YN-465C(Support wireless remote control through camera menu)
Note: 430EX, 550EX and 580EX or other parts of flash is not supported remote control via the camera menu, you need to manually set the flash parameters.
Specifications:
System type: Digital FSK 2.4GHz wireless transceiver
Distance: 100m
Channel: 7
Flash mode: E-TTL(II), manual flash, multi flash
Sync mode: 1st curtain, 2nd curtain, hi-speed sync
Groups: 3 groups(A/B/C)
Sync speed: 1/8000s
Input: Hotshoe(TTL, main contact)
Output: Hotshoe, PC port
Applicable battery: 2 * AA battery(Support 1.2V rechargeable battery) (Batteries not included)
Standby time: 60 hours
Package size: Approx. 12 * 11 * 5cm / 4.72 * 4.33 * 1.97in
Package weight: 234g / 8.25oz


Package includes:
2 * Transceiver
1 * User manual

Đánh giá (0)

Gửi Bình luận

Lưu ý: không hỗ trợ HTML!
    Bình thường           Tốt